Application Overview
Mining Aggregate Classification
Aggregate classification in mining is characterized by high impact and severe abrasion. For hard materials such as basalt and granite, Huayun supplies 65Mn spring steel woven mesh with HRC 45-50 hardness, and its pre-crimped structure keeps aperture geometry stable under high-frequency vibration. For wet classification with higher moisture, we recommend modular polyurethane panels whose elasticity and fatigue resistance help reduce blinding. The overall solution improves continuous operating time on vibrating screens and lowers cost per ton processed.
3
Common Challenges
3
Products for This Application
4
Usage Advice
Key Considerations
Key Selection Factors
For dry and wet high-abrasion screening of sand, ore, and aggregates.
Choose woven or polyurethane media based on moisture content
Confirm tensioned or modular installation method
Recommended Products
Products for This Application

65Mn Woven Screen
Woven from high-strength 65Mn spring steel wire for impact resistance and extreme wear in aggregate plants.

Polyurethane Screen
Elastic polymer screen media with low noise, strong wear life, and anti-blinding performance for fine screening.

Heavy Crimped Wire Mesh
Rigid, impact-resistant mesh commonly used for stone, sand, and grain classification.
Usage Advice
Usage Advice
- 1
Quarry aggregate sizing
For dry and wet high-abrasion screening of sand, ore, and aggregates.
- 2
Metal ore scalping
For dry and wet high-abrasion screening of sand, ore, and aggregates.
- 3
C&D waste recycling
For dry and wet high-abrasion screening of sand, ore, and aggregates.
- 4
Vibrating screen retrofits
For dry and wet high-abrasion screening of sand, ore, and aggregates.
Application Overview
Need a tailored solution for this application?
Send us your material properties, equipment dimensions, and target throughput — we'll provide tailored selection advice for your application.